35.292.970�BIW125W.qxd 11/05/2005 17:48 P?gina 8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of3. Select the required programme
the detergent drawer in order to activate the ECO valve.Turn the programme selector dial to the programme 1.
Then run a cotton cycle at 90!C, without any laundry inThe light Start/Pause starts to flash. The pilot lights
the machine, to remove any manufacturing residue fromcorresponding to the various phases making up the
the drum and tub.programme come on.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 90!C
Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by carefully pulling the door handle4. Select "SPIN REDUCTION" or
outwards."NO SPIN" option.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.Press the option button repeatedly, to select the desired
option. The relevant light illuminates
2. Measure out the detergent
and the fabric softener5. Select the required option
Pull out the dispenser drawer until it stops. Select Oprewash� or Orinse hold� option if required, the
Measure out the amount of detergent required, pour itcorresponding light illuminates.
into the main wash compartment and, if you wish to
carry out the prewash phase, pour it into the
compartment marked if you have selected the
Oprewash� option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
OMAX� mark in the drawer). Close the drawer gently.
8 |
ACEC
